WilkinsGRIPs in stock

WilkinsCLIP Deep Pocket stainless clips are shipping now, including 3 black 1/4” 2-56 UNC T8 Torx screws. These clips fit any knife that accepts the standard Benchmade, 3-hole clip pattern. Laser marked with my W-Logo or sterile.
Note: The included clip screws should work on all Mini Griptilians. If mounting the clip on a large Griptilian fitted with my BMG X2 grips, use the 2-56 UNC screws that hold the original factory grips together to mount the clip. The original factory clip screws will be too short but the GRIP screws will do the trick.

All WilkinsGRIP BMG mini and mini RL grips now include four black 1/8” 2-56 UNC screws with a T8 Torx head free. These screws hold the liners in the grips and I have received reports from customers that Benchmade is using a LOT of Loctite on these screws, making them almost impossible to remove without damaging the fragile T6 Torx drive on the factory screws. Hopefully this make the installation process easier!

PLEASE check the order info page for information regarding ordering, payment and shipping before contacting me with questions. Chances are, the answer to your question is right there.


Instagram

WilkinsGRIP FAQ
Here’s answers to a few questions I get asked often:

How much are extra spacers?
I don’t sell extra spacers.

Which WilkinsGRIP
fits my Griptilian®?
WilkinsGRIP BMG X2 fits
ALL Large Griptilian® models
WilkinsGRIP BMG mini fits ALL mini Griptilian® models

Can you make me a
custom set of WilkinsGRIPs?
No. It takes hours to set up and machine the first pair of grips.

I need some extra screws…
OK, but they cost money and please note my minimum order is €25. I will be happy to tell you the sizes and you can try and find them locally.

When will you have
more grips ready?
When I have a product announcement, it will be on my Facebook Page and news blog. Be sure and follow me on Facebook and Instagram.

A Few Installation Tips
I cannot provide detailed installation instructions for WilkinsGRIP products. Basically, when it comes to installation, you’re on your own. There are several videos out on the web providing instructions for taking your knife apart. None of them were made by me, however they may be helpful.

• Be sure and tape the sharp cutting edge on the blade before working on your knife.

• Put a light colored towel down on the table to keep dropped parts from bouncing and falling on the floor.

• You’ll need a set of good quality Torx drivers T6-T10, a 2mm hex driver and a small bottle of blue Loctite 243 (removable) or similar to re-lock the screws. Only use a TINY drop of thread locking fluid on each screw.

• When installing the bronze washers, retract the Axis lock bar slightly to allow the washer to slip over the pivot.

This modified product was not manufactured by Benchmade Knife Co., Inc.
This modified product was not manufactured by Spyderco, Inc.

WilkinsGRIP PVC Patch
Glow in the Dark
€6.55 (€5.50 non-EU)

WilkinsCLIP
Deep Pocket Stainless
€11.90 (€10 non-EU)

WilkinsGRIP S30V Blade
CPM S30V Stainless
€113.05 (€95 non-EU)

WilkinsGRIP BMG X2 Ti
Natural Titanium
SOLD OUT

WilkinsGRIP BMG X2 Ti
Matt Grey Titanium
SOLD OUT

WilkinsGRIP BMG X2 Ti
Fire Ano Titanium
SOLD OUT

WilkinsGRIP BMG X2
ClearCoat Alu
€148.75 (€125 non-EU)

WilkinsGRIP BMG X2
Blood Red Alu
€148.75 (€125 non-EU)

WilkinsGRIP BMG X2
Hunter Green Alu
€148.75 (€125 non-EU)

WilkinsGRIP BMG X2
Hardcoat Black Alu
€148.75 (€125 non-EU)

WilkinsGRIP BMG X2 Ti
3D Printed Inlays
€178.50 (€150 non-EU)

WilkinsGRIP BMG X2
Lizard Green & Black G10
€142.80 (€120 non-EU)

WilkinsGRIP BMG X2
Toxic Lime Green G10
€142.80 (€120 non-EU)

WilkinsGRIP BMG X2
Coyote Tan G10
€142.80 (€120 non-EU)

WilkinsGRIP BMG X2
Coarse Textured Black G10
€142.80 (€120 non-EU)

WilkinsGRIP BMG X2
Aircraft Grey & Black G10
€142.80 (€120 non-EU)

WilkinsGRIP BMG mini
Tan & Black G10
€113.05 (€95 non-EU)

WilkinsGRIP BMG mini
Lava G10
€113.05 (€95 non-EU)

WilkinsGRIP BMG mini
Swimming Pool Green G11
€113.05 (€95 non-EU)

WilkinsGRIP BMG mini
Coarse Black G10
€113.05 (€95 non-EU)

WilkinsGRIP BMG mini
Olive and Black G10
€113.05 (€95 non-EU)

WilkinsGRIP BMG mini
Frozen Margarita G11
€113.05 (€95 non-EU)

WilkinsGRIP BMG mini
Whiskey Sour G11
€113.05 (€95 non-EU)

WilkinsGRIP BMG mini
Glass Coyote G11
€113.05 (€95 non-EU)

WilkinsGRIP BMG mini
Hardcoat Black Alu
€119 (€100 non-EU)

WilkinsGRIP BMG mini
Metallic Turquoise Alu
€119 (€100 non-EU)

WilkinsGRIP BMG mini RL17
Natural Titanium
€178.50 (€150 non-EU)

WilkinsGRIP BMG mini RL17
Matt Grey Titanium
€178.50 (€150 non-EU)

WilkinsGRIP BMG mini RL17
Fire Ano Titanium
€178.50 (€150 non-EU)

WilkinsGRIP N_Dura4
2-Tone Titanium
€178.50 (€150 non-EU)

WilkinsGRIP N_Dura4
Fire Ano Titanium
€178.50 (€150 non-EU)

WilkinsGRIP N_Dura4
Matt Grey Titanium
€178.50 (€150 non-EU)

WilkinsGRIP N_Dura4
Natural Titanium
€178.50 (€150 non-EU)

WilkinsGRIP N_Dura4 Folder
Complete Knife
€249.90 (€210 non-EU)

WilkinsGRIP N_Dura4
Black G10
€142.80 (€120 non-EU)

WilkinsGRIP D4
Desert Tan G10
€113.05 (€95 non-EU)

WilkinsGRIP D4
Titanium
€178.50 (€150 non-EU)

WilkinsGRIP D4
Titanium
€178.50 (€150 non-EU)